This is a 4x4 algorithm cheat sheet for people who can already solve a 4x4 by reducing it to a 3x3 and just need to look up one algorithm again: building the centres, pairing the edges, the last two edges, the 3x3 stage and parity. Find the step you're on, match your cube to the picture, then do the algorithm. Each algorithm has a before and after pair of pictures, drawn from that exact algorithm on EasyRubic's 4x4 simulator.

Find your case fast

Look at your cube from above and tap the picture that matches it to see how to solve it. Grey cells are stickers you can ignore.

  • Case 1

    URU′R′U′F′UF

    StepAlgorithm
    Middle layer, edge pair goes rightU R U' R' U' F' U F
    Yellow crossF R U R' U' F'
    Yellow face (Sune)R U R' U R U2 R'
    Put the yellow corners in placeR' F R' B2 R F' R' B2 R2
    Put the yellow edges in placeR U' R U R U R U' R' U' R2
    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 2

    FRUR′U′F′

    StepAlgorithm
    Middle layer, edge pair goes rightU R U' R' U' F' U F
    Yellow crossF R U R' U' F'
    Yellow face (Sune)R U R' U R U2 R'
    Put the yellow corners in placeR' F R' B2 R F' R' B2 R2
    Put the yellow edges in placeR U' R U R U R U' R' U' R2
    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 3

    RUR′URU2R′

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 4

    R′FR′B2RF′R′B2R2

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 5

    2R2B2U22LU22R′U22RU2F22RF22L′B22R2

    TypeHow to spot itHold the cubeAlgorithm
    OLL parityAt the yellow cross, 1 or 3 edge pairs have yellow facing upFlipped pair at top-front2R2 B2 U2 2L U2 2R' U2 2R U2 F2 2R F2 2L' B2 2R2
    PLL parityThe yellow corners are right but the yellow edges match no 3x3 caseThe two swapped pairs at top-front and top-back2R2 U2 2R2 Uw2 2R2 Uw2 U2
    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 6

    2R2B2U22LU22R′U22RU2F22RF22L′B22R2

    1. You start with (input)
    2. After the formula
    See it in the post →

Starting from scratch and want every step explained? Read how to solve a 4x4 Rubik's Cube or follow the 4x4 guide first.

!A scrambled 4x4 Rubik's Cube Photo: [Mike Gonzalez (TheCoffee) / Wikimedia Commons](https://commons.wikimedia.org/wiki/File:Rubiks_revenge_scrambled.jpg), CC BY-SA 3.0

Notation and how to read the pictures

NotationMeaning
R, L, U, D, F, BOuter layers, same as on a 3x3. A ' means turn the other way, a 2 means a half turn.
Rw, Uw, DwTwo layers at once (w stands for wide).
2R, 2LOnly the second layer in from that side; the outer layer stays still.
Left / right pictureThe cube before and after the algorithm. Grey stickers are ones you don't need to look at yet.

New to this notation? See 4x4 notation.

Step 1: Build the centres

Each face has four centre pieces, and none of them is fixed (Ruwix). Two pieces of the same colour side by side make a bar. In this step's pictures, only the centre pieces are coloured.

#Hold the cubeCaseAlgorithm
1White on topTwo white bars: left column of the top, right column of the frontRw
2White on topOne piece missing, in the far left corner of the topRw U Rw'
3White on the bottomYellow bar in the right column of the top and of the frontRw U2 Rw'
4White left, yellow rightTop and front each have a bar of the other's colour, standing uprightRw U2 Rw'
5White left, yellow rightThe bar on top lies sidewaysU Rw U2 Rw'
6White left, yellow rightOne stray piece, in the far left corner of the topRw U Rw'
7White left, yellow rightThe stray piece is in the near left corner of the topRw U' Rw'
8White left, yellow rightTwo pieces diagonal from each other on the topRw U Rw' U2 Rw U Rw'

From case 3 on, every Rw needs an Rw' to undo it, or a finished centre block loses a column. With white on the left and yellow on the right, the moves Rw, U and F never touch those two faces.

  1. You start with (input)
  2. After the formula
  1. The two white bars become the white centre block.
  1. You start with (input)
  2. After the formula
  1. The last white piece is in the bottom row, right column of the front.
  1. You start with (input)
  2. After the formula
  1. The yellow centre block is done, and white is still whole on the bottom.
  1. You start with (input)
  2. After the formula
  1. The last two faces (red on top, green in front) are done at the same time.
  1. You start with (input)
  2. After the formula
  1. The first U turns the sideways bar upright.
  1. You start with (input)
  2. After the formula
  1. The front's stray piece is in the bottom row, right column.
  1. You start with (input)
  2. After the formula
  1. The front's stray piece is in the top row, right column.
  1. You start with (input)
  2. After the formula
  1. Case 6 done twice, with a U2 in between.

Other cases, including two diagonal pieces on the front, are in how to build 4x4 centres.

Fixing two centre blocks in the wrong colour order

According to J Perm (J Perm), the two algorithms below swap two whole centre blocks. They don't break up any edge pairs, but they do mix up the edges and corners, so do them before the 3x3 stage.

SwapAlgorithm
Top with frontRw' F2 Rw2 U2 Rw'
Top with bottomRw2 U2 D2 Rw2
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula

Step 2: Pair the edges

Put two matching edge pieces in the front-left and front-right edges (using outer layers only), then look up where they sit. Ruwix and J Perm both use these algorithms.

#Where the two edge pieces areSetupAlgorithmNew pair ends up
1Diagonal, left one higherTop-right edge not paired yetUw' R U R' UwTop-left
2Diagonal, right one higherTop-left edge not paired yetUw L' U' L Uw'Top-right
3Level with each otherFlip the front-right edgeR U R' F R' F' RBecomes case 1 or 2
  1. You start with (input)
  2. After the formula
  1. Left piece in the top half, right piece in the bottom half.
  1. You start with (input)
  2. After the formula
  1. The mirror image of algorithm 1.
  1. You start with (input)
  2. After the formula
  1. The front-right edge flips over in place. The other pairs only swap places on the top layer, and none of them come apart.

The last two edges

There's no unpaired edge left to swap in. Put the last two edges at front-left and front-right.

CaseAlgorithm
All four front stickers the same colourUw' R U R' F R' F' R Uw
The front of the front-right edge shows two coloursR U R' F R' F' R, then the algorithm above
Ruwix's version, same four-stickers-match caseDw R F' U R' F Dw'
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula

On the simulator, the first version and Ruwix's version solve the same case, so you only need to remember one. Every other position is in how to pair 4x4 edges.

Step 3: 3x3 algorithms on a 4x4

From here on you only turn outer layers: treat each centre block as a centre and each edge pair as an edge. On the simulator, none of the five algorithms below breaks up an edge pair or touches the centre blocks. Hold the cube with the yellow face on top, like the last steps of the 3x3 guide.

  1. You start with (input)First two layers all correct
  2. Result you will get after finishing this stepYellow cross on top
StepAlgorithm
Middle layer, edge pair goes rightU R U' R' U' F' U F
Yellow crossF R U R' U' F'
Yellow face (Sune)R U R' U R U2 R'
Put the yellow corners in placeR' F R' B2 R F' R' B2 R2
Put the yellow edges in placeR U' R U R U R U' R' U' R2
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula

For how many times to do each algorithm in each case, see all the 3x3 algorithms and how to solve the second layer. If your cube shows a pattern that isn't in either, it's most likely parity.

Step 4: Parity

According to the Speedsolving.com Wiki, each kind of parity turns up in about half of all solves, and the two kinds are independent of each other (Speedsolving.com Wiki). J Perm also puts it at about 50% for each kind. How to spot each one, with examples, is in 4x4 parity.

TypeHow to spot itHold the cubeAlgorithm
OLL parityAt the yellow cross, 1 or 3 edge pairs have yellow facing upFlipped pair at top-front2R2 B2 U2 2L U2 2R' U2 2R U2 F2 2R F2 2L' B2 2R2
PLL parityThe yellow corners are right but the yellow edges match no 3x3 caseThe two swapped pairs at top-front and top-back2R2 U2 2R2 Uw2 2R2 Uw2 U2
See it in 3D, before and after
  1. You start with (input)
  2. After the formula

OLL parity flips only the top-front edge pair, and every other piece stays put. Ruwix prints exactly this sequence, written in the older inner-layer notation.

  1. You start with (input)
  2. After the formula

The PLL parity algorithm is J Perm's version, 2R2 U2 2R2 Uw2 2R2 Uw2, with a U2 added at the end so it swaps exactly the front pair with the back pair. If the two swapped pairs sit next to each other, just do the algorithm anyway; what's left becomes a normal 3x3 case. If you get both kinds, do OLL parity first.

Quick table: the seven algorithms only a 4x4 needs

#Used forAlgorithm
1Adding one piece to a centre blockRw U Rw'
2Adding a bar to a centre blockRw U2 Rw'
3Pairing an edgeUw' R U R' Uw
4Flipping the front-right edgeR U R' F R' F' R
5The last two edgesUw' R U R' F R' F' R Uw
6OLL parity2R2 B2 U2 2L U2 2R' U2 2R U2 F2 2R F2 2L' B2 2R2
7PLL parity2R2 U2 2R2 Uw2 2R2 Uw2 U2
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula

Algorithm 5 is algorithm 3 with algorithm 4 tucked into the middle, so there are really only six new sequences to remember.

Once your solves run smoothly, carry on with how to get faster at 4x4 and the Yau method for 4x4, and time yourself on the 4x4 timer.

Video

The short video below from the Noah Richardson channel shows how to do OLL parity on a real cube. The video may use a different version of the algorithm from this table; when you practise, pick one version and stick with it.

4×4 OLL Parity FIXED (do this every time) | Algorithm 1Video · Noah Richardson · YouTube

Sources

Frequently asked questions

How is this table different from the beginner's 4x4 guide?

The beginner post explains why you do each step. This table just gathers the algorithms and pictures in one place, so you can look them up fast once you already know how to solve.

Besides the 3x3 algorithms, how many more does a 4x4 need?

About six or seven: two for the centre blocks, two or three for the edge pairs and two for parity. The quick table above lists them all.

Why do other sites show different parity algorithms?

There are many versions that do the same job. The Speedsolving.com Wiki lists lots of OLL parity versions, including shorter ones for speedsolvers. The one in this table flips exactly one edge pair, which makes it the easiest to check.

What if I go wrong halfway through an algorithm?

In the centre and edge pairing steps, finish with the closing move (for example the Uw at the end) and the centre blocks come back. If you go wrong in the middle of a parity algorithm, the centre blocks and edge pairs can come apart: rebuild them, then solve the 3x3 stage again.

Cover photo: Mike Gonzalez (TheCoffee) / Wikimedia Commons, CC BY-SA 3.0

EasyRubic Editorial

Friendly notes for anyone who wants to solve their first Rubik’s Cube.

Ready for your first turn?

Go from reading notation to each step of a solved cube.

Start with step 0

Learn the 3x3 step by step · 3x3 online timer