The mirror cube (original name: Mirror Blocks) is a 3x3 where every face is the same silver or gold, but the pieces come in different thicknesses. Scramble it and it turns into a lumpy, bumpy shape. The good news: inside, it works exactly like a 3x3, so if you can already solve a 3x3, you know almost everything you need to solve a mirror cube. This guide shows you how to read thickness instead of colour, then walks through the familiar 7 steps, with a picture for every algorithm.
Find your case fast
Look at your cube from above and tap the picture that matches it to see how to solve it. Grey cells are stickers you can ignore.
!A scrambled Mirror Blocks cube, with pieces of different thicknesses Photo: [Gerwin Sturm / Wikimedia Commons](https://commons.wikimedia.org/wiki/File:Rubik%27s_Mirror_Blocks_Cube_(4032144629).jpg), CC BY-SA 2.0
Every algorithm in this post has been tested on the EasyRubic cube simulator.
What is a mirror cube?
According to Wikipedia, the cube was invented by Hidetoshi Takeji in 2006. He first called it the "Bump Cube", because once you scramble it, the surface is no longer flat. In autumn 2008 it went into mass production under its official name, Mirror Blocks (Wikipedia).
The only difference from a normal 3x3 is the shape:
- There are no colours to look at. Every sticker is the same.
- Each piece is a block with its own size. Wikipedia notes that you tell the pieces apart by their shape.
- When it is solved, it is a flat-sided box again. Ruwix describes the goal exactly like that: get the cube back into a smooth box shape (Ruwix).
The mirror cube is not an official WCA event, so you solve it for fun and to train your eyes.
Is the mirror cube hard?
Ruwix calls it probably the easiest shape-changing cube to start with: you need to know how to solve a 3x3, and the technique is almost the same (Ruwix). The tricky part is for your eyes, not your hands:
- You have to compare heights and thicknesses, which is slower than comparing colours.
- A piece can look almost right when it is actually wrong. Ruwix says it plainly: solving a mirror cube involves a lot of trial and error.
If you cannot solve a 3x3 yet, start with how to solve a 3x3 Rubik's cube for beginners. All the algorithms below come from EasyRubic's 7-step guide, and each step below links to the matching step in that guide.
Four moves.
One at a time.
Tap each symbol and follow one piece. This is an exercise in watching the movement.
How to spot the pieces on a mirror cube
Treat thickness as colour. Each centre sits at a different height from the core of the cube, so the six faces have six different "colours".
Rules for spotting pieces:
- A piece in the right place sits flush with its neighbours. Its outer face is level with the outer face of the centre next to it. If it sticks out or sinks in, it is in the wrong place or turned the wrong way.
- Check every outer face of the piece. An edge has 2 outer faces, a corner has 3. One flat face is not enough.
- The centres never move. They are your reference points, just like on a normal 3x3.
Picking your starting face: Ruwix suggests making the cross on the thinnest layer, because you only need to find the small pieces (Ruwix). In this guide, the thinnest layer plays the part of the white face, and the layer opposite it plays the part of the yellow face.
This is the shape you are aiming for: a smooth box with every face flat. On the cube in the photo, the top layer is the thinnest and the bottom layer is much thicker.
!A solved mirror cube: a flat box with a thin top layer and a thick bottom layer Photo: [Thomas 003 / Wikimedia Commons](https://commons.wikimedia.org/wiki/File:Mirror_Cube_solved.png), Public domain
The last layer is the one opposite the thinnest layer. You do not need to know whether it is the thickest one: the method only needs it to be opposite the layer you started with.
How to read the pictures in this post: the EasyRubic drawing tool cannot draw mirror cube shapes yet, so the pictures use the colours of a normal 3x3. Just read each colour as a thickness. The cube on the left is where you are now, the cube on the right is after the algorithm; the pieces that matter are coloured and the rest are grey.
Step 1: the cross on the thinnest layer
Hold the thinnest layer on top. Find the four edges that have one face flush with the top centre and the other face flush with the centre beside it. Ruwix's tip: an edge that sticks out or sinks in next to a side centre belongs somewhere else.
- You start with (input)A scrambled cube
- Result you will get after finishing this stepWhite cross done
You solve this step by intuition, like the white cross in the guide. The cases and how to bring each piece home are in Step 1 of the guide.
Step 2: the four first-layer corners
Turn the cube over so the cross is on the bottom. A corner in the right place must be flush on all three faces: the bottom face and both side faces. Ruwix's advice is to keep putting a corner in and taking it out until the whole layer matches in both shape and height.
- You start with (input)White cross done
- Result you will get after finishing this stepFirst layer all correct
From here on, the post uses algorithms. If R, U' and B2 are new to you, read the Rubik's cube notation page or the post on Rubik's cube notation for beginners first: each letter is a face to turn (R is the right face, U is the top face, and so on), ' means turn it anticlockwise, and 2 means turn it twice. This step also has a picture of every case in Step 2 of the guide.
Bring the corner to the spot just above where it belongs (front right, top layer), then check which way its "white" face (the face with the same thickness as the thinnest layer) is pointing.
- White face pointing right:
R U R'
See it in 3D, before and after
- You start with (input)
- After the formula
- White face pointing to the front:
F' U' F
See it in 3D, before and after
- You start with (input)
- After the formula
- White face pointing up: this has two parts. The first part turns the corner so the white face points to the side, the second part puts it in.
R U2 R' U' R U R'
See it in 3D, before and after
- You start with (input)
- After the formula
- The corner is already in the bottom layer but not flush: the first part pushes it up, the second part brings it back in.
R U R' U' R U R'
- You start with (input)
- After the formula
If your eyes are not sure, use your fingers: run a finger along the edge of the bottom layer, and anywhere you feel a step is not finished yet.
Step 3: the middle-layer edges
Find an edge in the top layer whose front face is flush with the front centre. Ruwix suggests just trying each piece in, and carrying on with whichever one fits snugly.
- You start with (input)First layer all correct
- Result you will get after finishing this stepFirst two layers all correct
- The edge needs to go right:
U R U' R' U' F' U F
See it in 3D, before and after
- You start with (input)
- After the formula
- The edge needs to go left:
U' L' U L U F U' F'
See it in 3D, before and after
- You start with (input)
- After the formula
Not sure which side the edge belongs on? Try the right. If that spot is not flush after the algorithm, do the same algorithm again to take the piece back out, then send it to the left. This is exactly the "trial and error" Ruwix talks about. Every case is covered in Step 3 of the guide.
Step 4: the cross on the last layer
Turn the cube over so the layer opposite the thinnest one is on top. On a normal 3x3 you look for yellow stickers; on a mirror cube you look for edges whose top face is flush with the top centre. An edge whose top face sticks out or sinks in is the wrong way round.
- You start with (input)First two layers all correct
- Result you will get after finishing this stepYellow cross on top
F R U R' U' F'
See it in 3D, before and after
- You start with (input)
- After the formula
Repeat the algorithm until all four top edges are flush on the top face. How to hold the cube for each shape (dot, L shape, line) is exactly the same as in Step 4 of the guide.
Step 5: make the whole top face flat
This is the "yellow face" step of a normal 3x3. On a mirror cube, once this step is done the top face is completely flat; Ruwix describes the last-layer orientation step the same way.
- You start with (input)Yellow cross on top
- Result you will get after finishing this stepWhole yellow face on top
R U R' U R U2 R'
See it in 3D, before and after
- You start with (input)
- After the formula
Count the corners whose top face is flush with the top centre, then hold the cube according to that number:
- One flush corner: turn the top face so that corner is at the front left, as in the picture, then do the algorithm. If it is not done yet, turn the flush corner (there will still be only one) to the front left again and repeat.
- No flush corners: do the algorithm once, holding the cube any way you like. After that you will have one or two flush corners.
- Two flush corners: turn the top face so a corner that is not flush is at the front left, then do the algorithm. Do not leave a flush corner in that spot: the algorithm will only take you to a different two-corner case.
After each go, count again and hold the cube using the rules above until the whole top face is flat. On a normal 3x3, people look at which way the yellow stickers point to know how many goes they need; on a mirror cube that is hard to see, so a few tries is normal. To use as few goes as possible, see pictures of all 7 cases in Step 5 of the guide.
Step 6: put the top-layer corners in place
The top face is flat now, but the sides may still be bumpy. A corner in the right place is one whose two side faces are flush with the two centres beside it (after turning the top face to line it up). Ruwix's reminder: in the last step, look at the shape, not just the top face.
- You start with (input)Whole yellow face on top
- Result you will get after finishing this stepYellow corners in place
Hold a corner that is already in the right place at the front left:
R' F R' B2 R F' R' B2 R2
See it in 3D, before and after
- You start with (input)
- After the formula
Do it once or twice until all four corners are in place. If no corner is in the right place, do the algorithm once from any side, then start again. There is a picture of every case in Step 6 of the guide.
Step 7: put the top-layer edges in place
The last step. An edge in the wrong place is easy to see: it makes a bump or a dip between two corners that are already right.
- You start with (input)Yellow corners in place
- Result you will get after finishing this stepCube solved
Hold the finished side at the back:
R U' R U R U R U' R' U' R2
See it in 3D, before and after
- You start with (input)
- After the formula
Do it once or twice. Pictures and how to hold the cube for every case are in Step 7 of the guide.
When you are nearly done, the cube often looks like the photo below: every piece is right, but one layer is still turned out of line, so there are steps along the edges. Turn that layer back until the edges line up and you are finished.
!A nearly solved mirror cube, with one layer turned out of line leaving steps along the edges Photo: [Luis Alvaz / Wikimedia Commons](https://commons.wikimedia.org/wiki/File:Cubo_Mirror_con_una_cara_desplazada_05.jpg), CC BY-SA 4.0
When the cube is back to a flat box like the photo in the section on spotting pieces, you have solved the mirror cube.
Algorithm summary
Each algorithm comes with its picture.
- First-layer corner, white face on the right: R U R'
See it in 3D, before and after
- You start with (input)
- After the formula
- First-layer corner, white face at the front: F' U' F
See it in 3D, before and after
- You start with (input)
- After the formula
- First-layer corner, white face on top: R U2 R' U' R U R'
See it in 3D, before and after
- You start with (input)
- After the formula
- First-layer corner stuck wrong in the bottom layer: R U R' U' R U R'
- You start with (input)
- After the formula
- Middle-layer edge to the right: U R U' R' U' F' U F
See it in 3D, before and after
- You start with (input)
- After the formula
- Middle-layer edge to the left: U' L' U L U F U' F'
See it in 3D, before and after
- You start with (input)
- After the formula
- Last-layer cross: F R U R' U' F'
See it in 3D, before and after
- You start with (input)
- After the formula
- Flatten the top face: R U R' U R U2 R'
See it in 3D, before and after
- You start with (input)
- After the formula
- Put the corners in place: R' F R' B2 R F' R' B2 R2
See it in 3D, before and after
- You start with (input)
- After the formula
- Put the edges in place: R U' R U R U R U' R' U' R2
See it in 3D, before and after
- You start with (input)
- After the formula
Common mirror cube mistakes
- Looking at only one face of a piece. A piece can be flush on top but out of line on the side. Always check every outer face.
- Forgetting which face is on top. When the cube is all lumpy, it is easy to hold it upside down. Remember your reference: the thinnest layer is "white" and the layer opposite it is "yellow".
- Solving under bright light. The mirror surface reflects light, which makes bumps and dips hard to see. Tilt the cube, look from the side, or feel the edges with your fingers.
- Rushing. Ruwix stresses the trial-and-error part. Slow and steady is faster than starting over.
What to do next
Once you can solve the mirror cube comfortably, try timing yourself with the EasyRubic 3x3 timer. If you want to try other shape-changing 3x3 cubes, such as the Axis Cube, Windmill Cube or Fisher Cube, see the post on 3x3 shape mods. Those cubes keep their colours, but the centres have a shape, so they must point the right way.
With the EasyRubic app, you can scan a normal 3x3 with your camera and follow the solution step by step on a 3D cube. Get EasyRubic to practise the algorithms above before you move on to the mirror cube.
Sources
- Mirror blocks – Wikipedia
- The Mirror Cube aka Mirror Blocks – Ruwix
- Photo: Rubik's Mirror Blocks Cube – Gerwin Sturm, Wikimedia Commons.jpg), CC BY-SA 2.0
- Photo: Mirror Cube solved – Thomas 003, Wikimedia Commons, Public domain
- Photo: Cubo Mirror con una cara desplazada 05 – Luis Alvaz, Wikimedia Commons, CC BY-SA 4.0
Frequently asked questions
What is a mirror cube?
It is a 3x3 where every face is the same silver or gold colour and the pieces have different thicknesses. According to Wikipedia, Hidetoshi Takeji created it in 2006, and it has been widely sold since 2008 under the name Mirror Blocks.
Is a mirror cube harder than a 3x3?
The mechanism and the algorithms are exactly the same. The harder part is recognition: you compare thickness and flatness instead of colour, so each solve usually takes longer.
Do you need new algorithms to solve a mirror cube?
No. The algorithms from the beginner 3x3 method work just as they are. You only need to get the hang of how to look at the cube: a piece in the right place is flush with the centres next to it.
Which face should you start with?
Ruwix suggests making the cross on the thinnest layer, because its pieces are small and easy to find. The layer opposite it becomes the last layer you solve.
Is the mirror cube a WCA event?
No. The mirror cube is not an official WCA event.


