Solving a Rubik's Cube with one hand sounds like a party trick, but it is an official event of the World Cube Association (WCA), and the best solver in the world finishes a 3x3 cube with one hand in under 6 seconds. The good news: you don't need a new method. The way you already solve still works. You just change how you hold the cube and pick algorithms that suit one hand.

Find your case fast

Look at your cube from above and tap the picture that matches it to see how to solve it. Grey cells are stickers you can ignore.

  • Case 1

    U

    This is the most important idea in one-handed solving. The R and U faces are your "home": your fingers turn them without changing your grip. Each picture below is a before-and-after pair, with white on top; only the layer being turned is coloured.

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 2

    RUR′URU2R′

    The algorithm for step 5 is R U R' U R U2 R'. It has only R, U and one U2, so it is the nicest one-handed algorithm you already know. For U2, just flick U twice in a row.

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 3

    RU′RURURU′R′U′R2

    The algorithm for step 7 is R U' R U R U R U' R' U' R2. It is all R and U, which makes it great for practising light U flicks with your index finger.

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 4

    URU′R′U′y′R′UR

    U R U' R' U' y' R' U R y

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 5

    R′FR′B2RF′R′B2R2

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 6

    FRUR′U′F′

    The yellow cross algorithm F R U R' U' F' from step 4 has F at the start and the end. You can keep it as it is and do F by pressing the cube against the table (see the rules section below), or practise F with your thumb, very slowly.

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 7

    URU′R′U′y′R′UR

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 8

    FRUR′U′F′

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 9

    RUR′URU2R′

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 10

    R′FR′B2RF′R′B2R2

    1. You start with (input)
    2. After the formula
    See it in the post →
  • Case 11

    RU′RURURU′R′U′R2

    1. You start with (input)
    2. After the formula
    See it in the post →

This post goes through it piece by piece: which hand to use, how to hold the cube, which faces are easy or hard to turn, which algorithms from the EasyRubic guide already suit one hand, how to change the others, the WCA rules and the current records. Every move sequence in this post was tested on the EasyRubic cube simulator.

Before you start: what do you need?

The SpeedSolving Wiki and Cubelelo's guide agree: try one-handed solving once you can solve comfortably with two hands (Cubelelo). If you can't solve the cube yet, start with the 3x3 guide or the post Cách giải Rubik 3x3 cho người mới.

For the cube itself, Cubelelo recommends a light, smooth, magnetic cube with the tension set a little looser, so your fingers don't have to push as hard. You don't need to buy a special cube for one hand: the cube you use every day, loosened a little, is enough to get started.

Left hand or right hand?

According to the SpeedSolving Wiki, either hand can be fast. Many right-handed people actually pick the left hand, because when you hold the cube in your left hand, R and U moves are easier; and the hand that already holds the cube in two-handed solving has a head start (SpeedSolving Wiki). Cubelelo also says the left hand is the most popular choice, but there is no rule that says you must use it.

Tip for beginners: try both hands for a few solves, then choose one and stick with it. The rest of this post is written for left-handed solving, turning mostly the R and U faces. If you use your right hand, everything is mirrored: your easy faces are L and U.

TRY IT RIGHT HERE

Four moves.
One at a time.

Tap each symbol and follow one piece. This is an exercise in watching the movement.

How to hold the cube with one hand

The SpeedSolving Wiki describes two common grips (SpeedSolving Wiki):

  • Index and ring finger (the style of Ryan Patricio, a well-known one-handed solver): the index finger does U, U' and R'; the ring finger does R. The ring finger is also free to do D.
  • Index and little finger (the style of many top Japanese one-handed solvers and of Brian Loftus): the thumb, middle finger and ring finger hold the cube, the index finger does U and U', and the little finger does R and R'. This grip is very fast for sequences with only R and U, but other moves need you to turn the whole cube or change your grip.

For beginners, the first grip is usually easier because you also get D. Whichever grip you use, don't squeeze: Cubelelo lists "gripping too tightly" among the most common mistakes.

Which faces are easy and which are hard with one hand?

This is the most important idea in one-handed solving. The R and U faces are your "home": your fingers turn them without changing your grip. Each picture below is a before-and-after pair, with white on top; only the layer being turned is coloured.

  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula

On the other hand, the faces on the palm side are very hard to turn. Cubelelo gives an example: for a left-handed solver, L and L' become hard, even though they are very easy with two hands. The F face is hard too, because the front face sits right under your thumb.

  1. You start with (input)
  2. After the formula
  1. You start with (input)
  2. After the formula

The D face is in between: you can do it with your ring finger if you use the index and ring finger grip.

  1. You start with (input)
  2. After the formula

The rule to remember: the more R and U, the better an algorithm suits one hand. When you meet a hard face, it is usually faster to turn the whole cube so that face becomes R or U, as the SpeedSolving Wiki suggests.

Warm-up exercise: R U R' U'

The SpeedSolving Wiki suggests repeating short sequences such as R U' or R U R' U' over and over so your fingers get used to the rhythm. This four-move sequence only uses R and U, so it is the perfect one-handed warm-up.

  1. You start with (input)
  2. After the formula

Do R U R' U' six times in a row and a solved cube comes back to solved (checked on the simulator). This is a handy self-check: if the cube isn't solved after six times, you made a wrong move somewhere. Your first goal: six in a row with one hand without dropping the cube.

Algorithms from the guide that already suit one hand

Two last-layer algorithms in the EasyRubic guide use only R and U. There is nothing new to memorise; just practise them with one hand. The pictures below hold yellow on top, as in the guide; only the yellow layer is coloured.

Sune: orienting the yellow face (step 5)

The algorithm for step 5 is R U R' U R U2 R'. It has only R, U and one U2, so it is the nicest one-handed algorithm you already know. For U2, just flick U twice in a row.

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

Doing Sune six times in a row also brings the cube back to where it started (checked on the simulator), so you can practise for a long time without having to solve it again.

Moving the yellow edges into place (step 7)

The algorithm for step 7 is R U' R U R U R U' R' U' R2. It is all R and U, which makes it great for practising light U flicks with your index finger.

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

Do it three times in a row and a solved cube comes back to solved (checked on the simulator).

Changing algorithms with F and B for one hand

Two other algorithms in the guide use hard faces. The trick: replace the hard face with a turn of the whole cube and then use R or U. The result on the cube is exactly the same as the original algorithm; we checked every pair on the simulator.

Whole-cube rotation notation: y turns the whole cube the same way as U, and x turns the whole cube the same way as R. An apostrophe (y', x') means the opposite direction. See more on the Rubik's Cube notation page.

Inserting a layer 2 edge to the right (step 3)

The original algorithm for step 3 is U R U' R' U' F' U F. The second half has F' and F, which are hard with one hand. The one-handed version replaces the last three moves with: turn the whole cube y' (the front face moves to where the right face was), do R' U R, then turn y to get back to your old grip:

U R U' R' U' y' R' U R y

The picture below shows that one-handed version, yellow on top as in the guide. The white layer and the edge to insert are coloured.

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

If you don't feel the need to turn back, you can leave out the final y and look for the next edge from the new angle.

Swapping the yellow corners (step 6)

The original algorithm for step 6 is R' F R' B2 R F' R' B2 R2, which has both F and B. Turn the whole cube x first, and F becomes U and B becomes D, so the algorithm uses only R, U and D:

x R' U R' D2 R U' R' D2 R2 x'

Do D2 with your ring finger, as two flicks. The picture below shows the result of the algorithm (exactly the same as the original), yellow on top.

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

The yellow cross algorithm F R U R' U' F' from step 4 has F at the start and the end. You can keep it as it is and do F by pressing the cube against the table (see the rules section below), or practise F with your thumb, very slowly.

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

One-handed algorithm summary

StepAlgorithm for one-handed solvingFaces used
Warm-upR U R' U'R, U
Layer 2 edge (step 3)U R U' R' U' y' R' U R yR, U and cube turns
Yellow cross (step 4)F R U R' U' F'Has F
Yellow face (step 5)R U R' U R U2 R'R, U
Yellow corners (step 6)x R' U R' D2 R U' R' D2 R2 x'R, U, D and cube turns
Yellow edges (step 7)R U' R U R U R U' R' U' R2R, U

One picture for each algorithm in the table (yellow on top, except the warm-up):

  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula
See it in 3D, before and after
  1. You start with (input)
  2. After the formula

Once you get the hang of it, Cubelelo notes that many one-handed solvers move on to special one-handed CFOP algorithm sets with fewer hard moves. That comes later; for beginners, the table above is enough.

WCA rules for one-handed solving

The "3x3x3 One-Handed" event has its own rules in Article C of the WCA Regulations (WCA Regulations). What beginners need to know:

  • You can inspect with both hands (C1b+): during the 15 seconds of inspection, you may hold the cube with both hands.
  • Solve with exactly one hand (C1b, C1c): once you have touched the cube with one hand, the other hand may not touch it again, or the solve counts as a DNF (did not finish).
  • You can switch hands between solves (C1b++): you don't have to use the same hand for every solve in a round.
  • You can press the cube against the table (C1b4): you may push the cube against the table surface to turn it. The SpeedSolving Wiki calls this "table abuse", and it is often used for M moves.
  • Stop the timer with both hands (A6d): as in every other event, put both hands on the timer to stop it.

A round is usually an average of 5 (regulation 9b1a): the fastest and slowest solves are dropped, and the other three are averaged. To find out how to sign up for a competition, see the post Thi đấu Rubik WCA.

One-handed Rubik's Cube records

According to WCA data (WCA API):

  • World record single: 5.62 seconds, by Patrick Ponce (USA), at Mid-Atlantic Speedcubing Championship 2026 (WCA).
  • World record average: 6.99 seconds, by Zhen Chen (China), at Wuhu Open 2026. His five solves were 7.27, 7.07, 6.12, 9.48 and 6.64 seconds (WCA).
  • Vietnamese record: 7.39 seconds single and 9.81 seconds average.

For comparison, the SpeedSolving Wiki says that at a typical competition, the winning one-handed time is around 15 to 18 seconds. Watch Patrick Ponce's 5.62-second solve and see how his hand flicks almost nothing but R and U:

5.62 Rubik's Cube One-Handed World Record SingleVideo · Patrick Ponce · YouTube

You can find the records for every event in the post Kỷ lục thế giới Rubik 2026.

How to practise one-handed solving every day

  • Start slow. Cubelelo suggests finishing every one-handed solve, even if it takes more than a minute. According to them, beginners usually get comfortable after one to two weeks, and need about one to three months of regular practice to get fast.
  • Practise little and often. Your hand will get tired, especially in long sessions. A few short sessions a day are better than one long one.
  • Build stamina. The SpeedSolving Wiki suggests doing many algorithms in a row without a break. If you slow down a lot at the end of each solve, that is a sign you need more stamina.
  • Follow scrambles. The Wiki quotes Johannes Laire: doing random moves or scramble sequences gives your whole hand a workout. You can get scrambles from the 3x3 timer page.
  • Warm up your fingers. The Wiki suggests stretching your wrist and fingers before you practise.

Don't worry if at first you forget algorithms you knew by heart. The SpeedSolving Wiki calls this "forgetting algorithms when solving one-handed": many people only remember algorithms through the feel of their hands in two-handed solving, so when they switch to one hand they can't slow down move by move. The fix is to do the algorithm again very slowly, saying each move out loud, until your new hand gets used to it.

Common beginner mistakes in one-handed solving

Cubelelo lists the common mistakes; we have grouped them into four:

  • Gripping too tightly. Your fingers can't flick lightly and the cube jams easily. Relax your hand until the cube is only just not falling.
  • Turning too fast. It is much easier to drop the cube with one hand than with two. Smooth first, fast later.
  • A cube that is too stiff or too heavy. Loosen the tension a little, or see the post Nên mua Rubik nào cho người mới.
  • Starting too early. If you still have to think during two-handed solves, practise two-handed a bit more, read up on finger tricks, then come back.

Video guide

J Perm's video (in English) shows how to hold the cube, how to turn and how to practise one-handed solving. You can play it slowly and follow along.

Rubik's Cube: How To Solve One Handed (OH)Video · J Perm · YouTube

With the EasyRubic app, you can scan your real cube with the camera and see every move on a 3D cube, then repeat that sequence with one hand. Get EasyRubic and try the R U R' U' warm-up today.

References

Frequently asked questions

Is solving a Rubik's Cube with one hand hard?

Not in terms of algorithms: you use the same method you already know. The hard part is your hand: it takes a few weeks for your fingers to get used to R and U, and to know when to turn the whole cube instead of a hard face.

Should I solve one-handed with my left hand or my right hand?

Either is fine. Many right-handed people choose the left hand because R and U are easier, and the left hand is already used to holding the cube in two-handed solving. Try both and then pick one.

Do I need a special cube for one-handed solving?

No. A light, smooth, magnetic cube with the tension set a little looser is enough.

Can I press the cube against the table in a WCA competition?

Yes. Regulation C1b4 of the WCA Regulations allows pressing the cube against the table to turn it. But once the solve has started, your other hand may not touch the cube.

What is the one-handed Rubik's Cube world record?

According to the WCA, 5.62 seconds for a single solve (Patrick Ponce) and 6.99 seconds for an average (Zhen Chen). Records change often, so check the WCA website for the latest.

This information is based on competition results owned and maintained by the World Cube Association, published at worldcubeassociation.org/results as of 17.10.2026.

Cover photo: Noémi Bruzák / Wikimedia Commons, CC BY 2.5

EasyRubic Editorial

Friendly notes for anyone who wants to solve their first Rubik’s Cube.

Ready for your first turn?

Go from reading notation to each step of a solved cube.

Start with step 0

Learn the 3x3 step by step · 3x3 online timer