ROUX · STEP 1 / 7

The first block

Make the bottom two layers of the left face one solid block (1×2×3), as in the picture on the right.

  1. You start with (input)A scrambled cube
  2. Result you will get after finishing this stepThe first block

What is Roux? Four parts, in order

Roux does not go layer by layer. You build two side blocks, place the four top corners, then solve the last six edges with only and . Try it once you can solve with the 7 beginner steps.

1. Left blockStep 1
2. Right blockStep 2, step 1 again on the right
3. Four top cornersSteps 3 and 4
4. Last six edgesSteps 5 to 7, M and U only
The M move turns the middle layer between the left and right faces, the same way as . Roux uses a lot, above all in the last 3 steps.

Follow 3 steps

  1. 1. Hold the cube like this

    Yellow centre on top, white underneath, red on your left. Keep it that way for this whole step.

    Top
    Bottom
  2. 2. Find these pieces

    Find the 5 pieces of the red block: 1 white–red edge, 2 corners with white and red, 2 edges with red. They can be anywhere on the cube.

    white – red
    white – red – green
    white – red – blue
    red – green
    red – blue
  3. 3. One piece at a time, in order

    • Start with the white–red edge, then the 2 corners, then the last 2 edges. A piece not on top yet: bring it up first (see More detail).
    • Turn until the piece sits like one of the pictures below. The piece with the yellow ring is the one you are placing.
    • Tap the picture and turn along. Then go to the next piece, until all 5 are in.
    See the cases

More detail

  1. Hold the cube yellow centre on top, white centre at the bottom. Keep it that way through every Roux step.
  2. Pick the first block’s colour. In the pictures it is red: turn the whole cube so the red centre is on your left. The front in the pictures is green.
  3. The first block is the bottom two layers of the left face: 5 pieces, one at a time like the beginner method: the white–red edge at the bottom (group 1), the front corner, then the back corner (groups 2 and 3, like beginner step 2), then the front and back layer-2 edges (groups 4 and 5, like beginner step 3).
  4. The back spots have their own pictures (groups 3 and 5), drawn from behind: keep holding the cube the same way, just tilt it to see the back; the formulas use .
  5. Piece not on top yet: for the bottom edge, turn the face holding it to bring it up. A corner or layer-2 edge stuck in the wrong spot: use the "already in layer 1 (layer 2), but wrong" picture of that spot's group to pop it up. An edge in the middle column at the bottom: brings it up. A piece on the right (bottom or middle layer, where the second block goes): turn once or twice to bring it up; nothing is built on the right yet, so the red block is safe.

Five pieces, one at a time

  1. 1/5
  2. 2/5
  3. 3/5
  4. 4/5
  5. 5/5

Which case do you have?

Before you compare and all through the formula: keep the front (the face marked FACING YOU in the pictures) turned towards you. A picture marked BACK, AWAY FROM YOU looks from behind: do not turn the cube, just tilt it to see the back.

1. The white edge at the bottom left

2. The front white corner on the left (white–red–green)

3. The back white corner on the left (white–red–blue)

Seen from the back left: hold the cube as before (yellow on top, red block on the left), just tilt it to look at the back. The formulas use B (the back face), no whole-cube turn needed.

4. The front layer-2 edge on the left (red–green)

5. The back layer-2 edge on the left (red–blue)

Seen from the back left: hold the cube as before (yellow on top, red block on the left), just tilt it to look at the back. The formulas use B (the back face), no whole-cube turn needed.

L2
  • Order: the bottom edge, then the 2 corners, then the 2 layer-2 edges.
Was this step easy to understand?