Old Pochmann is the first method almost everyone picks up when they want to solve a Rubik's Cube blindfolded. Each time, you send exactly one piece home with a PLL algorithm you already know, so the only new algorithm you need is one for parity. This guide walks through the whole method: how to letter the stickers, how to swap edges, how to swap corners, parity, and a table of setup moves for every letter. Every letter has its own picture.
Find your case fast
Look at your cube from above and tap the picture that matches it to see how to solve it. Grey cells are stickers you can ignore.
This guide is for people who can already solve a 3x3 and know cube notation. If you can't solve a 3x3 with your eyes open yet, start with how to solve a 3x3 Rubik's Cube for beginners and come back here afterwards. Every algorithm and every setup move here has been tested on the EasyRubic cube simulator.
What is Old Pochmann?
Old Pochmann (the SpeedSolving Wiki calls it Classic Pochmann) was invented by Stefan Pochmann. The idea is very simple: each step swaps just two pieces. One of them always sits in a fixed spot called the buffer, and the other is sent to its correct home (SpeedSolving Wiki).
The price you pay is the number of moves. The SpeedSolving Wiki says one solve this way can go well over 200 moves, while fast blindfolded methods need only about 70 to 80. Ruwix also points out that competitive blindfolded solvers have moved on to newer methods (Ruwix). But for a beginner, solving it correctly matters more than solving it fast, and Old Pochmann is the shortest road to your first blindfolded solve.
The three algorithms you need
Hold the cube with white on top and green in front, just like every picture in this guide. Each picture shows two cubes: the left one is before the algorithm, the right one is after. Only the pieces that matter are coloured.
T-perm, for edges. It swaps the top right edge with the top left edge, and also swaps the two right corners of the top face:
R U R' U' R' F R2 U' R' U' R U R' F'
See it in 3D, before and after
- You start with (input)
- After the formula
Shortened Y-perm, for corners. This is the Y-perm without the F at the start and the F' at the end. It swaps the top back left corner with the bottom front right corner, and also swaps the top back and top left edges:
R U' R' U' R U R' F' R U R' U' R' F R
- You start with (input)
- After the formula
Ra-perm, only for parity. It swaps the top back and top left edges, along with the two right corners of the top face:
R U R' F' R U2 R' U2 R' F R U R U2 R' U'
See it in 3D, before and after
- You start with (input)
- After the formula
If you already know the T-perm and Y-perm from CFOP, only the Ra-perm is new. Practise all three until you can do them with your eyes closed, because once you are blindfolded you can't look back to fix a mistake.
Giving every sticker a letter: Speffz
To remember where the pieces are, every sticker on the edges and corners gets a letter. This guide uses Speffz, a lettering scheme suggested by Ville Seppänen and Rob Holt in 2010 (SpeedSolving Wiki). The rules:
- Go through the six faces in this order: top (white), left (orange), front (green), right (red), back (blue), bottom (yellow).
- Each face has 4 letters, going clockwise as you look straight at that face. Corners start from the top left sticker, edges start from the top sticker.
- The bottom face is seen as if you tipped the cube up, with the front face still at the top of it.
- Edges and corners each have their own set of letters, both from A to X.
Edge letters on each face, in the order top, right, bottom, left of that face:
- Top (white): A back, B right (buffer), C front, D left (swap spot).
- Left (orange): E top, F right, G bottom, H left.
- Front (green): I top, J right, K bottom, L left.
- Right (red): M top (the other sticker of the buffer), N right, O bottom, P left.
- Back (blue): Q top, R right, S bottom, T left.
- Bottom (yellow): U top, V right, W bottom, X left.
Corner letters on each face, in the order top left, top right, bottom right, bottom left of that face:
- Top (white): A back left (buffer), B back right, C front right, D front left.
- Left (orange): E top left (buffer), F top right, G bottom right, H bottom left.
- Front (green): I top left, J top right, K bottom right, L bottom left.
- Right (red): M top left, N top right, O bottom right, P bottom left (swap spot).
- Back (blue): Q top left, R top right (buffer), S bottom right, T bottom left.
- Bottom (yellow): U top left, V top right, W bottom right, X bottom left.
"Left" and "right" here mean as you look straight at that face. For example, edge letter J is the green sticker of the green-red edge; corner letter P is the red sticker of the yellow-green-red corner.
How to memorise: follow the buffer
Old Pochmann has two buffers:
- Edges: the buffer is the top right edge, and its white sticker is letter B. The swap spot is letter D (the top left edge).
- Corners: the buffer is the top back left corner, and its white sticker is letter A. The swap spot is letter P (the red sticker of the bottom front right corner).
In the two pictures below, only the buffer and the swap spot are coloured. The first picture is for edges: the top right edge (B) swaps with the top left edge (D) after the T-perm.
See it in 3D, before and after
- You start with (input)
- After the formula
The second picture is for corners: the top back left corner (A, which is hidden at the back, so you only see its white sticker on top) swaps with the bottom front right corner (P) after the shortened Y-perm.
- You start with (input)
- After the formula
How to read the edge sequence:
- Look at sticker B. Which home sticker does that colour belong to? Write down that sticker's letter, for example J.
- Look at sticker J. Which home sticker does that colour belong to? Write down that letter next.
- Keep going until you reach a colour that belongs to the buffer itself (letter B or M).
Corners work exactly the same way: start from sticker A and stop when you reach a colour of the buffer itself (A, E or R). You memorise edges and corners as two separate sequences. Most people group the letters in pairs to make them easier to remember, then turn each pair into a picture or a familiar word.
When you do the solve, each letter in the sequence is one swap: bring that sticker to the swap spot with a setup move, do the swap algorithm, then undo the setup move.
Edges: setup moves and the T-perm
Ruwix reminds us of one important rule: the T-perm also swaps the two top right corners, so edge setup moves must not touch those two corners (Ruwix). The buffer (the top right edge) must stay put as well. That's why the setup moves below only use the left and bottom faces:
- Lw: turn the left face together with the middle layer next to it, in the same direction as L.
- Dw: turn the bottom face together with the middle layer next to it, in the same direction as D.
Example: letter J
Sticker J is the green sticker of the front right edge. The setup move Dw2 L brings that sticker right to spot D. Do the T-perm, then undo the setup move (L' Dw2). All three parts together swap the buffer with edge J:
- You start with (input)
- After the formula
Look at the picture: as well as the two edges, the two right corners of the top face are also swapped. That's the extra swap the T-perm makes, which we cover in the parity section.
Edge setup move table
There is no setup move for B and M (they are the buffer) or for D (already at the swap spot, so just do the T-perm). For the other 21 letters, do the setup move, the T-perm, then undo the setup move. Each picture shows all three parts.
Top and left faces:
- Letter A: Lw2 D' L2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter C: Lw2 D L2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter E: L Dw' L
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter F: Dw' L
- You start with (input)
- After the formula
- Letter G: L' Dw' L
- You start with (input)
- After the formula
- Letter H: Dw L'
- You start with (input)
- After the formula
Front and right faces:
- Letter I: Lw D' L2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter J: Dw2 L
- You start with (input)
- After the formula
- Letter K: Lw D L2
- You start with (input)
- After the formula
- Letter L: L'
- You start with (input)
- After the formula
- Letter N: Dw L
- You start with (input)
- After the formula
- Letter O: D' Lw D L2
- You start with (input)
- After the formula
- Letter P: Dw' L'
- You start with (input)
- After the formula
Back and bottom faces:
- Letter Q: Lw' D L2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter R: L
- You start with (input)
- After the formula
- Letter S: Lw' D' L2
- You start with (input)
- After the formula
- Letter T: Dw2 L'
- You start with (input)
- After the formula
- Letter U: D' L2
- You start with (input)
- After the formula
- Letter V: D2 L2
- You start with (input)
- After the formula
- Letter W: D L2
- You start with (input)
- After the formula
- Letter X: L2
- You start with (input)
- After the formula
Memory tip: the edge letters in the middle layer (F, H, J, N, P, T) all use Dw to move the edge to the left face, then one L turn. The letters on the bottom face (U, V, W, X) all end with L2.
Parity: when the edge sequence has an odd number of letters
Every T-perm swaps the two top right corners once. If the edge sequence has an even number of letters, they swap and swap back, so no problem. If the number is odd, those two corners are still swapped after the edges, and the corner sequence you memorised no longer matches the cube.
According to Ruwix, when the number of edge letters is odd, the number of corner letters is odd too, so this always happens in both parts at the same time (Ruwix). How to fix it: finish the edges, do the Ra-perm once, then do the corners.
R U R' F' R U2 R' U2 R' F R U R U2 R' U'
See it in 3D, before and after
- You start with (input)
- After the formula
The Ra-perm puts the two top right corners back the way they were when you memorised the cube. It also swaps the top back edge with the top left edge, but the corner part (with its odd number of letters) swaps those two edges back exactly once, so in the end everything is solved.
Ruwix does it in the opposite order: corners first, then the Ra-perm, then edges. We tested both orders on the simulator with the same Ra-perm above, and both solved the cube. Pick one order and stick with it so you don't get mixed up.
Corners: setup moves and the shortened Y-perm
The shortened Y-perm also swaps the top back and top left edges, so corner setup moves must not touch those two edges, or the buffer corner. The setup moves below only use R, D and F.
Example: letter K
Sticker K is the green sticker of the bottom front right corner. The setup move F D brings that sticker to spot P. Do the shortened Y-perm, then undo the setup move (D' F'):
- You start with (input)
- After the formula
Corner setup move table
There is no setup move for A, E, R (the buffer) or for P (already at the swap spot, so just do the shortened Y-perm). For the other 20 letters, do the setup move, the shortened Y-perm, then undo the setup move. For a few letters (D, G, M, N, O, S), the end of the setup move and the start of the algorithm put two R turns side by side. In the pictures, those turns are already merged: for example, letter M is R' followed by R, which cancel each other out, so the picture starts straight from U'.
Top and left faces:
- Letter B: R D'
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter C: F
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter D: F R'
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter F: F2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter G: D2 R
- You start with (input)
- After the formula
- Letter H: D2
- You start with (input)
- After the formula
Front and right faces:
- Letter I: F' D
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter J: F2 D
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter K: F D
- You start with (input)
- After the formula
- Letter L: D
- You start with (input)
- After the formula
- Letter M: R'
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter N: R2
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter O: R
- You start with (input)
- After the formula
Back and bottom faces:
- Letter Q: R' F
See it in 3D, before and after
- You start with (input)
- After the formula
- Letter S: D' R
- You start with (input)
- After the formula
- Letter T: D'
- You start with (input)
- After the formula
- Letter U: F'
- You start with (input)
- After the formula
- Letter V: D' F'
- You start with (input)
- After the formula
- Letter W: D2 F'
- You start with (input)
- After the formula
- Letter X: D F'
- You start with (input)
- After the formula
Memory tip: the letters on the right face (M, N, O) need just one R turn. The letters on the bottom face (U, V, W, X) all bring the corner to the bottom front left or right corner, then use F'.
When the buffer comes back too early
Sometimes you reach a colour that belongs to the buffer itself while some pieces are still not in place. Ruwix calls the fix a cycle break: pick a piece that isn't solved, write down the letter of any sticker on that piece as if you were sending the buffer there, then carry on reading from that sticker as usual (Ruwix). The new cycle ends when you read a sticker of the piece you just picked again; write that letter down too.
The two most common special cases of a cycle break are a piece that is flipped or twisted in place.
An edge flipped in place
In the picture, the buffer edge and the front bottom edge are both in the right place but flipped. Sticker B has the red colour of the buffer itself, so you need a cycle break. Pick the front bottom edge and write down U. Read sticker U: it has the green colour of that same edge, which is letter K. The sequence is U, K:
- You start with (input)
- After the formula
Two letters, two T-perms, so no parity. Flipped edges always come in pairs.
A corner twisted in place
In the picture, the buffer corner and the bottom front right corner are both in the right place but twisted. Sticker A has the colour of the buffer itself, so you need a cycle break. On the bottom corner, the bottom face shows green, the front face shows red and the right face shows yellow. Break into this corner with letter V (the sticker on the bottom face). Read sticker V: it has the green colour of that same corner, which is letter K. The sequence is V, K:
- You start with (input)
- After the formula
This way of reading always works: the first letter is the sticker you picked for the cycle break, and the second letter is the sticker that the colour sitting on the first letter belongs to.
A full solve, start to finish
The cube in the picture below was scrambled so that both sequences are short. Reading from the buffer:
- Edges: sticker B has the green colour of the green-red edge, write J. Sticker J has the yellow colour of the yellow-orange edge, write X. Sticker X has the yellow colour of the yellow-green edge, write U. Sticker U has the white colour of the buffer itself, so stop. Edge sequence: J, X, U.
- Corners: sticker A has the green colour of the yellow-orange-green corner, write L. Sticker L has the red colour of the yellow-red-blue corner, write O. Sticker O has the white colour of the white-red-blue corner, write B. Sticker B has the white colour of the buffer itself, so stop. Corner sequence: L, O, B.
The edge sequence has 3 letters, an odd number, so there is parity. Here's how to solve it:
- Edges J, X, U: for each letter, do the setup move from the table, the T-perm, then undo the setup move.
- Ra-perm.
- Corners L, O, B: for each letter, do the setup move, the shortened Y-perm, then undo the setup move.
The picture shows that whole solve, from the scrambled cube to the solved cube:
- You start with (input)
- After the formula
Old Pochmann practice plan
- Memorise the three algorithms (T-perm, shortened Y-perm and Ra-perm) until you can do them correctly with your eyes closed.
- Memorise Speffz. Point at any sticker and say its letter, until you don't have to think about it.
- Go through the edge table, eyes open. Take a solved cube, do one letter (setup, T-perm, undo), and check it against the picture here. Do the same letter twice and the cube should be back to how it was.
- Solve the edges, eyes open. Scramble the cube, read the edge sequence, and do it. If every edge is in place after the edges (the two top right corners may be swapped if the sequence was odd), you read it correctly.
- Add the corners and parity, still with your eyes open.
- Put on the blindfold once you can solve with your eyes open without looking back at the sequence even once.
Most failed beginner solves come from undoing a setup move the wrong way, or forgetting parity. Every time a solve fails, open your eyes and compare the cube with the sequence you memorised, and you'll find the letter that went wrong. Once you can solve it reliably, time yourself on the 3x3 timer to track your progress.
Video
Want to see it in motion? The short video below from the Last Layer King channel on YouTube shows more of what this guide covers. The video belongs to that channel and is embedded directly from YouTube.
Sources
Frequently asked questions
What is Old Pochmann?
It's a method for solving a Rubik's Cube blindfolded, invented by Stefan Pochmann. Each step swaps the piece in the buffer with another piece, using the T-perm for edges and the shortened Y-perm for corners, together with a setup move.
How long does it take to get the hang of Old Pochmann?
What you need to memorise can be counted: 24 Speffz letters for edges, 24 for corners, 21 edge setup moves, 20 corner setup moves and one Ra-perm algorithm. If you already know the T-perm and Y-perm, that's everything new. Your first solve is usually slow because of the number of moves: the SpeedSolving Wiki says one solve can go well over 200 moves. If you turn about one move per second while blindfolded, the turning alone takes more than 3 minutes, not counting memorisation time. Once you're used to it, Ruwix says Old Pochmann can still get you under 2 minutes.
When do I get parity?
When the edge sequence has an odd number of letters. In that case the corner sequence has an odd number of letters too. Do the Ra-perm once between the edges and the corners.
Do I have to use Speffz?
No, but Speffz is the most popular lettering scheme. If you use it, you can read other people's setup move tables and guides without having to swap letters around.
What should I try after Old Pochmann?
The SpeedSolving Wiki says the downside of Old Pochmann is the large number of moves. Once you can solve correctly every time, you can look into blindfolded methods that use fewer moves; Ruwix says competitive solvers have moved on to newer and faster methods.


