The easiest way for a beginner to solve a 7x7 Rubik's Cube is to reduce it to a 3x3, exactly like the 4x4, 5x5 and 6x6: gather the 25 centre pieces of each face into one centre block, pair the five edge pieces of each edge into one edge group, then solve it like a 3x3. The 7x7 needs no new tricks. It just takes longer, so you need a clear order to work in.

This is the last post in the big-cube series on EasyRubic. If you can't solve the 5x5 yet, get the hang of that one first: the 7x7 reuses almost every step of the 5x5, just twice over. If you can't solve a 3x3 yet, start with how to solve a 3x3 Rubik's Cube for beginners.

What's inside a 7x7?

!A scrambled 7x7 Rubik's Cube Photo: [Hellbus / Wikimedia Commons](https://commons.wikimedia.org/wiki/File:V-Cube_7_scrambled.jpg), CC BY-SA 3.0

According to Wikipedia, the outside of a 7x7 has 218 pieces:

  • 8 corners, just like a 3x3.
  • 60 edge pieces, five on each edge: one middle piece, two inner pieces right next to the middle one, and two outer pieces right next to the corners. These three kinds never swap roles.
  • 150 centre pieces, 25 on each face, and the one in the very middle is fixed.

The fixed centre tells you straight away which colour each face is, so you don't have to remember the colour order like on a 4x4 or 6x6. The 7x7 was designed by Panagiotis Verdes and is sold as the V-Cube 7. Its faces are slightly curved, because the mechanism inside needs thicker outer layers (Wikipedia).

Notation. R is the outer right layer. Rw is the two right layers, 3Rw is the three right layers. 2R is only the second layer, 3R is only the third layer. Uw, 3Uw, Dw and 3Dw work the same way for the top and bottom. The fourth layer is the very middle slice, holding the fixed pieces. The ' mark and the number 2 mean the same as in normal cube notation.

Step 1: Build the centres

Each face's centre block is a 5×5 square. Think of it as five vertical strips of five pieces each: the middle strip holds the fixed piece, two inner strips sit next to it, and two outer strips sit next to the edges. Cubelelo also suggests building strips of five and then joining the strips together (Cubelelo).

Order: the white face, then the yellow face opposite it, then the four side faces. Once the first two are done, keep them on the left and right, and work between the front and the top.

Middle strip. Put the face you're working on at the top. Find a piece of that colour on another face, turn an inner slice to bring it up to the top, turn U so it sits next to the fixed piece, then turn that slice back. You do this part by eye, just like building centres on a 5x5.

The two left strips. On the front face, gather ten pieces of the same colour into a 2×5 block in the two right columns of the centre. Turn U so the two left columns of the top face are the unfinished part, then do:

  1. You start with (input)
  2. After the formula

3Rw U2 3Rw'

This algorithm swaps the two right columns of the front with the two left columns of the top. The other four faces don't change, and the fixed piece doesn't move.

The two right strips. Turn U2 to move the finished part to the right, then gather the next 2×5 block and do the same algorithm again. If you're only missing a single outer strip next to the edge, use the one-column algorithm:

  1. You start with (input)
  2. After the formula

Rw U2 Rw'

This one swaps the outermost right column of the front with the outermost left column of the top.

The last two faces are where it's easiest to get mixed up. After each algorithm, glance back at the four finished faces. This is the slowest step, so it's worth spending a few sessions just practising centres.

Step 2, pass one: pair groups of three

From now on, the centre blocks must always be put back the way they were. In this pass, treat the cube like a 5x5: only look at the middle piece and the two inner pieces of each edge. Leave the two outer pieces for later.

Pair two inner pieces with the middle piece

  1. You start with (input)
  2. After the formula

Put the middle piece you want to pair at the front-right edge. Bring two matching inner pieces to the front-left edge: one in the top half, one in the bottom half, and the colour on their left side must match the colour on the front side of the middle piece. Turn U so the top-right edge is one that's not yet paired, then do:

3Uw' 3Dw R U R' 3Uw 3Dw'

  1. 3Uw' 3Dw moves the two slices holding the inner pieces to the right. The middle slice stays still, so the two inner pieces land on either side of the middle piece.
  2. R U R' stores the group of three on the top-left edge and brings the top-right edge down.
  3. 3Uw 3Dw' puts the centre blocks back the way they were.

Paired groups on the bottom layer and on the two back edges aren't touched, so store finished groups on the bottom layer. Tip: try 3Uw' 3Dw first. If the three pieces line up and each side shows only one colour, carry on; if not, turn it back and flip the edge.

Flip an edge

  1. You start with (input)
  2. After the formula

Middle piece facing the wrong way? Bring that edge to the front-right and do R U R' F R' F' R. The edge flips in place and no group gets split up. This algorithm only uses outer layers, so it works in both passes.

The last two edges of pass one

When only two edges are left, put them at the front-left and front-right, each with its middle piece already on its own edge, then check which inner piece is in the wrong place:

  1. You start with (input)
  2. After the formula
  • Swap the inner piece in the top half of the front-left edge with the inner piece in the bottom half of the front-right edge: 3Uw' R U R' F R' F' R 3Uw.
  1. You start with (input)
  2. After the formula
  • Swap the inner piece in the bottom half of the front-left edge with the inner piece in the top half of the front-right edge: 3Dw R U R' F R' F' R 3Dw'.

The outer piece in the same row moves along too, but that's fine, because the outer pieces only get paired in pass two. The middle piece on the front-right edge gets flipped in place.

Inner-piece parity

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

Sometimes the last edge has the right middle piece but its two inner pieces are swapped with each other. No outer-layer turns can fix that. Bring that edge to the top-front and do:

3R2 B2 U2 3L U2 3R' U2 3R U2 F2 3R F2 3L' B2 3R2

This algorithm only swaps the two inner pieces of that edge. It's the 4x4 and 5x5 parity algorithm, written for the third layer. Cubelelo points this out too: on big cubes the parity algorithm stays the same, you just pick the right layer (Cubelelo).

Step 2, pass two: add the two outer pieces

Now every edge has a group of three in the middle. All that's left is to add the two outer pieces at the ends. The algorithms in this pass only turn the second slice, so they never split a group of three.

Pair the two outer pieces

  1. You start with (input)
  2. After the formula

Put the group of three you want to finish at the front-right edge, and two matching outer pieces at the front-left edge, one in the top half and one in the bottom half. The colour rule is the same as in pass one: the colour on the left side of the two outer pieces must match the colour on the front side of the group of three. Turn U so the top-right edge is one that's not finished yet, then do:

Uw' Dw R U R' Uw Dw'

The finished five-piece edge is stored on the top-left edge. The top-right edge only loses its two outer pieces: its group of three moves down to the front-right edge, ready for the next pairing.

The last two edges of pass two

  1. You start with (input)
  2. After the formula
  • Swap the outer piece in the top half of the front-left edge with the outer piece in the bottom half of the front-right edge: Uw' R U R' F R' F' R Uw.
  1. You start with (input)
  2. After the formula
  • Swap the outer piece in the bottom half of the front-left edge with the outer piece in the top half of the front-right edge: Dw R U R' F R' F' R Dw'.

The groups of three on both edges stay whole; only the group on the front-right edge gets flipped in place. Sometimes you need both algorithms, once each.

Outer-piece parity

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

If the last edge has its two outer pieces swapped with each other, bring that edge to the top-front and do the same parity algorithm, this time on the second layer:

2R2 B2 U2 2L U2 2R' U2 2R U2 F2 2R F2 2L' B2 2R2

This algorithm only swaps the two outer pieces; the group of three in the middle stays put. These two parities are independent: you might get both, one, or neither.

Step 3: Solve it like a 3x3

From here on, only turn the outer layers. Each 5×5 centre block counts as one centre, and each five-piece group counts as one edge. Follow all seven steps of the 3x3 guide, starting with the white cross:

  1. You start with (input)A scrambled cube
  2. Result you will get after finishing this stepWhite cross done

Good news: the 7x7 has no parity at this stage. According to Wikipedia, the corners, middle edge pieces and fixed centres of a 7x7 follow the same rules as a 3x3, so the parity cases of the 4x4 and 6x6 can't happen once you've reduced it to a 3x3. If the last step shows a strange pattern, most likely an edge group or a centre block was put together wrongly earlier on.

How fast can the best cubers solve a 7x7?

At WCA competitions, the 7x7 event uses the mean of three solves (Wikipedia). According to WCA data, the 7x7 world record is 1 minute 27.47 seconds for a single solve and 1 minute 35.93 seconds for the mean. The Vietnamese records are 1 minute 33.75 seconds and 1 minute 41.29 seconds (WCA). A beginner's first solve usually takes much, much longer than that, and most of the time goes into building the centres. Want to time yourself? Try the timer.

Sources

Frequently asked questions

Should I go straight to the 7x7 after the 3x3?

No. Get the hang of the 4x4 and 5x5 first. Every step of the 7x7 is a 5x5 step done more times, and on a smaller cube you fix mistakes much faster.

How many algorithms do I need to remember for the 7x7?

On top of the 3x3 algorithms, this guide uses eleven algorithms, but there are really only five ideas: moving a centre strip into place, pairing edges, flipping an edge, swapping pieces on the last two edges, and parity. Each idea only changes in which layer gets turned.

Does the 7x7 have OLL parity and PLL parity?

No. The 7x7 only has edge parity while you're pairing edges: the two inner pieces or the two outer pieces of the last edge are swapped. Once it's reduced to a 3x3, it behaves like a normal 3x3.

Why pair the edges in two passes?

Inner pieces and outer pieces move on different slices. If you pair the inner pieces first with a three-layer slice, then add the outer pieces with a two-layer slice, the second pass doesn't undo the first.

If I get parity, do I have to start over?

No. Do the parity algorithm on the right layer, then carry on with the step you were on.

This information is based on competition results owned and maintained by the World Cube Association, published at worldcubeassociation.org/results as of 17.10.2026.

Cover photo: Hellbus / Wikimedia Commons, CC BY-SA 3.0

EasyRubic Editorial

Friendly notes for anyone who wants to solve their first Rubik’s Cube.

Ready for your first turn?

Go from reading notation to each step of a solved cube.

Start with step 0

Learn the 3x3 step by step · 3x3 online timer