Blindfolded memorisation (cubers just call it memo) is the part that makes many people give up on blindfolded solving. You already know the algorithms from solving with your eyes open. What is new is looking at the cube for a few dozen seconds, remembering all of it, and then keeping that string in your head for the whole solve. This guide shows you how in three steps: read the cube as letters, join the letters into pairs and pictures, then place those pictures along a route you know well in your mind.
This post is for you if you have already read how blindfolded solving works and are working on the Old Pochmann method. Both picture examples in this post were checked on the EasyRubic cube simulator: reading the cube in the picture gives exactly the letters written here.
Memo has three layers
Each time you memorise, you do three things one after another:
- Read: trace the pieces from the buffer and say the letter of each sticker.
- Pair: group every two letters in a row into a pair.
- Store: turn each pair into a picture and put it in a familiar place.
When you are starting out, do each layer very slowly. Once you get the hang of it, the three happen almost at once: your eyes read two letters and your mind already sees the picture.
Layer 1: read the cube as letters
Every coloured sticker on the edges and corners has its own letter. This guide uses Speffz, the lettering scheme suggested by Ville Seppänen and Rob Holt in 2010. SpeedSolving Wiki says Speffz was made so blindfolded solvers could easily talk to each other about piece positions, and it then became the common base for letter pair memo (SpeedSolving Wiki).
A quick reminder of the rules (the full table is in the Old Pochmann post):
- Hold the cube with white on top and green in front.
- The six faces go in the order top, left, front, right, back, bottom; each face has 4 letters, from A to X.
- On each face, the letters go clockwise as you look straight at that face. Edges start from the top sticker, corners start from the top-left sticker.
- The edge buffer is sticker B (the white sticker of the top-right edge). The corner buffer is sticker A (the white sticker of the top-back-left corner).
You always read the same way: look at the buffer sticker, ask "which home sticker does this colour belong to?", write down that home sticker's letter, then move on and look at that sticker. Stop when you reach a colour of the buffer piece again.
In the pictures below, only the pieces you need to read are coloured; the grey pieces count as already in place. The picture on the left is the cube you need to memorise. The picture on the right is the cube after solving those letters with Old Pochmann; the move sequence in the picture is the execution part, and you do not need it here yet.
Exercise 1: read the edge string
- You start with (input)
- After the formula
Look at the left picture and read along:
- Sticker B (top right, on the top face) is white. The other colour of that piece, on the right face, is green. So this is the white sticker of the white-green edge, which is letter C.
- Look at sticker C (top front, on the top face): it is green, and its other side on the front face is yellow. The green sticker of the yellow-green edge is letter K.
- Look at sticker K (bottom front, on the front face): it is red. This piece is the red-blue edge (the blue is on the bottom face, out of sight). The red sticker of that edge is letter N.
- Look at sticker N (on the right of the right face, next to the back face): it is white, from the white-blue edge. The white sticker of that edge is letter A.
- Look at sticker A (top back, on the top face): the colour there belongs to the buffer piece itself. Stop.
Edge string: C K N A. Four letters, grouped into two pairs: CK, NA.
Exercise 2: read the corner string
See it in 3D, before and after
- You start with (input)
- After the formula
- Sticker A (top-back-left corner, on the top face) is red. The piece there is the white-green-red corner (its other two colours are on hidden faces). The red sticker of that corner is on the right face, at the top left as you look straight at the right face, which is letter M.
- Look at sticker M (top-front-right corner, the sticker on the right face): it is green. The piece there is the white-orange-green corner. The green sticker of this corner is at the top left of the front face, which is letter I.
- Look at sticker I (top-front-left corner, the sticker on the front face): the colour there belongs to the buffer corner itself. Stop.
Corner string: M I, one pair: MI.
Notice something in exercise 2: the letters M and I are not on the white face. Because every coloured sticker has its own letter, one letter tells you both where the piece is and which way it is turned. You do not need to remember separately which pieces are twisted.
Layer 2: join into letter pairs
Remembering "C K N A M I" as six separate letters is tiring. Group them two at a time into CK, NA, MI and there are only three things left to remember. SpeedSolving Wiki calls these letter pairs: each pair stands for two pieces and is turned into a word, a sound or a picture (SpeedSolving Wiki).
A few rules worth keeping:
- Pair the letters in the exact order you read them. CK and KC are two different pairs and need two different pictures.
- Pair edges with edges and corners with corners. The two strings stay separate.
- If a string has an odd number of letters, the last letter stands alone. SpeedSolving Wiki points out that this leftover letter is a sign of parity, and Ruwix also uses an odd number of edge letters to know about parity in advance (Ruwix). How to deal with parity is in the Old Pochmann post.
Layer 3: turn letter pairs into pictures
Ruwix suggests linking each pair to a picture that is very easy to see, picked quickly without thinking for long, and then joining the pictures into a short story (Ruwix). The stranger the story, the easier it is to remember.
For the two exercises above:
- CK: cake
- NA: nachos
- MI: milk
The story: a giant cake squashes a plate of nachos, then everything gets tipped into a glass of milk. Run through the story again and you get back C K N A for the edges and M I for the corners.
Tip: the simplest way is to pick a word that starts with the two letters of the pair, or has them as its first clear sounds. Speffz uses all 24 letters from A to X, so you will also meet less friendly ones such as Q and X. Choose one way to read each awkward letter, for example X as "ex", and always read it the same way. This is our suggestion, not a fixed rule; what matters is that a letter always sounds the same to you.
Make your letter pair list in advance
Do not invent new pictures while you are memorising. Make a list ahead of time instead: one fixed picture for each pair, used forever. With 24 letters there are 576 pairs, but you do not need to do them all at once. Start with the pairs that come up often in your own practice, and add more each week.
A few ideas to get you started:
- BA: a banana
- CA: a cat
- HO: a house
- LA: a lamp
- MA: a map
- TO: a tomato
When you practise, if a pair never brings a picture to mind, change the picture for that pair instead of forcing yourself to remember it.
The memory palace: store pictures in order
When the string gets long, a story can easily get the order mixed up. That is when people use a memory palace, also called the method of loci. According to Wikipedia, this technique ties each thing you need to remember to a spot in a place you know very well, and when you need it, you walk that route again in your head. It is linked to the Greek poet Simonides, and Cicero tells the story in De Oratore (Wikipedia). SpeedSolving Wiki also mentions this approach for blindfolded solving: each spot along the route holds one picture (SpeedSolving Wiki).
How to build one for the cube:
- Pick a place you know really well, for example your home.
- Pick a fixed route through about 10 spots: the front door, the shoe rack, the sofa, the TV, the dining table, the kitchen, and so on.
- Each spot holds one or two letter pair pictures. Edges use the first spots, corners use the later ones.
- When you solve, walk the route again from the front door and take the pictures out in order.
For the exercises above: the cake at the front door, the nachos on the shoe rack, the glass of milk on the sofa. Always walk exactly the same route, so you never have to think about the order of the spots.
How many spots are enough? SpeedSolving Wiki estimates that a Classic Pochmann solve has about 22 to 24 letters (SpeedSolving Wiki), which is about 11 to 12 pairs. Ten spots, each with one or two pictures, is more than enough.
Remembering corners by sound
Not every letter needs a picture. SpeedSolving Wiki describes audio memo: you say the letter pair as a single sound, for example by putting a vowel between two consonants. It is quick but fades fast, so the wiki suggests using it for only part of the cube, such as the corners, memorising that part last and solving it first (SpeedSolving Wiki).
Ruwix has the same idea: the corner string is shorter than the edge string, so the corner pictures do not need to be very clear, and you can keep the corner letters in your head while you put the blindfold on (Ruwix). The order Ruwix suggests: memorise the edges, memorise the corners, then solve the corners first, fix parity if needed, and solve the edges last.
Saying the corner string quietly to yourself like a short tune is often enough. For example, "M I" can be read as "mi", like the note in do-re-mi.
A practice plan for memo
- Know Speffz by heart. Point at any sticker and say its letter straight away. Keep going until you no longer need to count.
- Practise reading, no memorising yet. Scramble the cube, read the edge and corner strings out loud and write them on paper. Redo the two exercises in this post to compare.
- Practise memorising on its own. Read the string, turn it into pictures and place them along your route. Wait one minute, then write the string again from memory and compare it with the paper.
- Solve with your eyes open from memory. After memorising, put the cube face down on the table for a while, then solve it with your eyes open without looking at the paper again. If the cube comes out solved, your memo is working.
- Put the blindfold on. Only once step 4 works every time.
Once you can solve it, time yourself on the 3x3 timer and write down your memo time separately, so you know which part needs more practice. The better you know your letter pair list, the faster the pairing and storing steps get.
References
Frequently asked questions
Do I need a good memory for blindfolded memo?
You do not need a special memory. The hard part is reading the cube into letters correctly. Once you have a letter pair list and a familiar route, remembering about ten pictures is something anyone can get the hang of with practice.
Should I memorise edges or corners first?
Ruwix suggests memorising the edges first because their string is longer, then memorising the corners last and solving the corners first, while the corner string is still fresh in your mind. The Old Pochmann post solves the edges first; both orders work, so pick one and stick with it.
Do I have to use Speffz?
No. You can make up your own lettering, or remember each piece by its pair of colours. But Speffz is the most common scheme, so other people's setup tables and guides make sense to you straight away.
What is a memory palace?
It is a way of tying each thing you need to remember to a spot along a familiar route, then walking that route again in your head to take them out in order. For the cube, each spot holds one or two letter pair pictures.
What does an odd number of letters mean?
The last letter has no partner, and with Old Pochmann that is the sign that you need the parity step.


