From the outside, a 3x3 Rubik's Cube looks like 54 coloured stickers. But when you solve it, you don't move single stickers, you move pieces. Knowing the parts of a Rubik's Cube (what kinds of pieces there are, how many colours each one has, which ones stay put and which ones move around) is the first step to solving the cube without getting lost. This post goes through each type of piece with pictures, then shows why knowing them helps you solve faster.

Every cube picture and move sequence in this post was drawn and tested on EasyRubic's Rubik's Cube simulator.

How many pieces does a 3x3 Rubik's Cube have?

According to Wikipedia, a 3x3 Rubik's Cube has 9 coloured stickers on each face, 54 in total, and is made of 26 small cubes fitted together (Wikipedia). Those 26 pieces come in three types:

PieceHow manyStickers on each pieceWhere it sits
Centre61In the middle of each face
Edge122Between two corners
Corner83At the 8 corners of the cube

Let's add them up: 6 + 12x2 + 8x3 = 6 + 24 + 24 = 54 stickers. Exactly the number you can see.

In the middle of the cube there is one more part you can't see: the core. It comes up later in this post.

Centres: they stay put and set the colour of each face

A centre piece has only one sticker. When you turn the faces, a centre just spins on the spot and never leaves its place. The picture below colours only the six centres. After the three moves R U F, the other pieces have gone somewhere else, but the six centres are still exactly where they were:

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

That's why the colour of the centre is the colour of the whole face. The face with the red centre is the red face, even if there isn't a single other red sticker on it yet. Which colour is opposite which, and why the colour scheme can never change, is explained in detail in the post on Rubik's Cube colours.

TRY IT RIGHT HERE

Four moves.
One at a time.

Tap each symbol and follow one piece. This is an exercise in watching the movement.

Edges: 12 pieces with 2 colours each

An edge piece sits between two corners, along each "border" of the cube. Each one has exactly two colours, for example white-red or green-orange. The picture below colours only the 12 edges. On the left is the cube after a scramble of a few moves, and on the right is the cube after R U R' U' brings them back to their places:

  1. You start with (input)
  2. After the formula

The two colours of an edge always travel together. Wherever the white sticker of the white-red edge is, the red sticker is right next to it. So when you look for "the white-red sticker", you are really looking for one piece, and there is only one piece like that on the whole cube.

Corners: 8 pieces with 3 colours each

Corner pieces sit at the 8 corners of the cube. Each one has three colours, for example white-green-red. The picture below colours only the 8 corners, with the same R U R' U' sequence as above:

  1. You start with (input)
  2. After the formula

The three colours of a corner always travel together too. The white-green-red corner has only one right spot: the corner between the white, green and red centres.

Which pieces does one move turn?

One face of a 3x3 cube is a layer of 9 pieces: 1 centre, 4 edges and 4 corners. Turning a face turns all 9 of those pieces at once. The picture below colours the 8 edges and corners of the right layer, before and after one R move:

  1. You start with (input)
  2. After the formula

Look closely and you will spot two rules:

  • Edges always go to edge spots, and corners always go to corner spots. No move ever puts an edge into a corner's spot.
  • Centres never change places, they only spin on the spot.

That's why every solving method splits the work by type of piece. For example, the beginner method starts with the 4 edges that have a white sticker (the white cross), then moves on to the 4 corners that have a white sticker.

  1. You start with (input)A scrambled cube
  2. Result you will get after finishing this stepWhite cross done

The right spot is not enough: it must face the right way too

A piece is solved when both of these are true:

  1. Right spot (position): it sits between the centres that match its colours.
  2. Right way round (orientation): each of its stickers faces the side whose centre has the same colour.

Beginners often find a piece that is in the right spot but has its colours "the wrong way round". That piece is in the wrong orientation.

A flipped edge

An edge has 2 orientations: correct, or flipped (its two colours have swapped faces). The picture below holds the cube with white on top. In the left picture, the white-green edge is already in its spot, between the white and green centres, but its white sticker is facing the front. EasyRubic's guide fixes this case with F U' R U:

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

A twisted corner

A corner has 3 orientations: correct, twisted once clockwise, or twisted once anticlockwise. In the left picture below, the white-green-red corner is at its own corner, but its white sticker is facing the right face instead of the top. The sequence R' D' R D R' D' R D twists it the right way round:

See it in 3D, before and after
  1. You start with (input)
  2. After the formula

The picture colours just one corner so it is easy to see. On a real cube, this sequence also mixes up the bottom layer, so don't try it on a nearly solved cube until you know how to use it. In the beginner method, fixing orientation in the last layer has its own steps: the yellow cross (orienting the edges) and the yellow face (orienting the corners).

  1. You start with (input)Yellow cross on top
  2. Result you will get after finishing this stepWhole yellow face on top

Why can't you flip just one edge?

Wikipedia explains that when you only turn the faces, the orientation of the last corner is always decided by the other 7 corners, and the orientation of the last edge is decided by the other 11 edges (Wikipedia). Put simply:

  • You can't twist just one corner and leave every other piece as it was.
  • You can't flip just one edge and leave every other piece as it was.

If your cube has only one twisted corner or one flipped edge left, the cube was put back together wrong or a corner was twisted by hand. It doesn't mean you solved it wrong. The post on an unsolvable Rubik's Cube shows how to spot and fix this. To find out how these numbers add up to more than 43 quintillion (43 billion billion) possible positions, see how many combinations a Rubik's Cube has.

What is inside a Rubik's Cube?

If you take the cube apart, you will see that the inside is fairly simple. As Wikipedia describes it (Wikipedia):

  • The core is a three-dimensional cross: three axles that cross in the middle.
  • The six centres are attached to the six ends of the core. Each centre spins around a fastener, so the centres and the core are really one part. That's why Wikipedia counts a Rubik's Cube as 21 parts: the core (with its six centres) plus the 20 edges and corners.
  • A spring sits between the fastener and the centre and presses the centre inwards, so the whole cube doesn't get loose. Older official cubes have screws you can adjust to make them tighter or looser, newer ones use fixed rivets, and some cheap cubes only have plastic joints.
  • Edges and corners aren't attached to the core. Each one has a hidden "foot" on the inside that hooks onto the pieces next to it. The centres and the pieces around it are what hold it in place.

That last point explains why a cube can pop: when you turn a face that isn't lined up, or the cube is too loose, an edge or corner slips out of its hook. Wikipedia also notes that you can take the cube apart by turning one face 45 degrees and prying an edge out. How to take it apart and put it back together properly is in the post on how to take apart a Rubik's Cube. Want your cube tighter or looser? See the post on adjusting Rubik's Cube tension.

When you put it back together, put it together in the solved state. Wikipedia says that if you put the pieces back at random, only 1 in 12 ways can be solved with normal turns.

How are the 2x2 and 4x4 different?

The Speedsolving Wiki page on the "cubie" (one small piece of the cube) gives a general formula for an NxN cube: there are always 8 corners, 12x(N-2) edges and 6x(N-2)x(N-2) centres (Speedsolving Wiki). Here is what that gives for each cube:

CubeCornersEdgesCentres
2x2800
3x38126
4x482424

The 2x2: corners only

A 2x2 cube is made of just 8 corners, but it still needs a hidden core inside so it can turn, as the Speedsolving Wiki points out. Because there are no centres, you have to work out which face is which colour from the corners. The picture below colours one corner on a 2x2, before and after R U R' U':

  1. You start with (input)
  2. After the formula

How to solve this cube is in the post how to solve a 2x2 Rubik's Cube for beginners.

The 4x4: centres can move

On a 4x4, each face has 4 centre pieces, and they can move. The picture below colours only the centres. One turn of the two right layers (Rw) has moved centres onto other faces:

  1. You start with (input)
  2. After the formula

So when you solve a 4x4, you first build the centres, then pair up the edges, and only then solve it like a 3x3. See how to solve a 4x4 Rubik's Cube for beginners.

How does knowing the parts help you solve?

Three small habits, taken from everything above:

  1. Look for pieces, not stickers. When you need the white-red sticker, look for the edge that has white and red on it. There is only one piece like that.
  2. Use the centres to find the spot. A piece's spot is always between the centres that match its colours.
  3. Check both the spot and the orientation. A piece in the right spot with its colours the wrong way round isn't done yet. Don't turn at random, use the right case from the guide.

Once you are used to thinking in pieces, you can start with how to solve a 3x3 Rubik's Cube for beginners. If you can't read letters like R, U and F yet, see Rubik's Cube notation for beginners first.

Video

Prefer to see it in motion? The short video below from the Rubik Từ Số 0 channel on YouTube (in Vietnamese) shows more of what this post covers. The video belongs to that channel and is embedded straight from YouTube.

Nhận diện Cấu Tạo Cơ Bản & Cầm Rubik đúngVideo · Rubik Từ Số 0 · YouTube

Sources

Frequently asked questions

How many pieces does a 3x3 Rubik's Cube have?

26 pieces you can see: 6 centres, 12 edges and 8 corners. In the middle there is also the core, which is joined to the six centres.

Do the centres on a Rubik's Cube move?

On a 3x3, the centres only spin on the spot and never swap places with each other. On a 4x4 and bigger cubes, the centres can move.

How many stickers does a Rubik's Cube have in total?

54 stickers: 9 on each face, and there are six faces.

Why does my Rubik's Cube keep popping?

Edges and corners aren't attached to the core, they hook onto each other. If you turn a face that isn't lined up, or the cube is too loose, a piece can slip out. Adjusting the tension usually makes the cube pop less.

Can you flip just one edge?

Not if you only turn the faces. If your cube has exactly one flipped edge left, it was put together wrong and needs to be taken apart and put back together.

EasyRubic Editorial

Friendly notes for anyone who wants to solve their first Rubik’s Cube.

Ready for your first turn?

Go from reading notation to each step of a solved cube.

Start with step 0

Learn the 3x3 step by step · 3x3 online timer