Solving the centres on a 5x5 Rubik's Cube is easiest when you build them one strip of three pieces at a time: the middle strip first, then the two side strips, for each of the six faces in turn. The part that stumps most beginners is the last two centres, so this guide draws every case separately and adds two "one piece at a time" algorithms so you never get stuck.
This is step 1 of how to solve a 5x5 for beginners. Every move sequence in this guide, and every claim like "this move does not break that centre", has been tested on EasyRubic's Rubik's Cube simulator.
Which pieces make up the centres of a 5x5?
According to Wikipedia, a 5x5 has 54 centre pieces, nine on each face:
- One fixed centre right in the middle. The whole cube has 6 of these, and they never leave their face.
- Four edge centres, sitting right next to the fixed centre on its four sides and making a plus sign. The whole cube has 24 of them.
- Four corner centres, sitting in the four corners of the centre block. The whole cube has 24 of these too.
An edge centre can never swap places with a corner centre, however you turn the cube. So when you are looking for a missing piece, you only need to look for the right kind.
The fixed centre is what makes this easier than on a 4x4. Its colour is the colour of the whole face, so you don't have to remember a colour order like in solving 4x4 centres. Ruwix points this out too: the 5x5 has fixed centre pieces (Ruwix).
Solving the centres is the first step of the "reduce to a 3x3" way of solving (Reduction). According to the Speedsolving.com Wiki, it is the most widely used group of methods for the 5x5 and bigger cubes, and it also works as a beginner method (Speedsolving.com Wiki).
How to read the pictures and the notation
- Each picture shows two cubes: before and after the moves written under it. Only the centre pieces are coloured. Edges and corners are grey because you don't need to worry about them in this step.
- You can see the top, front and right faces.
- Rw means turning the two right layers together. Lw, Uw and Dw work the same way for the left, the top and the bottom.
- 3R means turning only the middle slice (the third layer from the right), in the same direction as R. This guide only uses it for the last two centres. This way of numbering layers is explained in how to solve a 6x6 for beginners.
- The ' mark and the number 2 mean the same as in Rubik's Cube notation.
Two names used all through this guide:
- Middle strip: the fixed centre plus the two edge centres at either end of it.
- Side strip: one edge centre plus the two corner centres at either end of it. Each face has one middle strip and two side strips.
The order for the six centres
J Perm goes in this order: one centre, then the opposite centre, then the other four. He suggests starting with white to keep things less confusing, though any colour works (J Perm). Ruwix also starts with the white centre.
This guide follows that exact order: white, yellow, then the four side centres. For each centre, J Perm's way is always the middle strip first, then one side strip at a time.
Step 1: The white centre
There is nothing to keep safe yet, so you can turn freely. Hold the cube with the white fixed centre on top.
Middle strip. Find a white edge centre. Turn the faces until it sits in the middle of the right column on the front, then turn Rw. That piece goes up to the top and sits right next to the fixed centre. Turn U2 to move the empty spot on the other side over to the right, then do the same with the second white edge centre.
- You start with (input)
- After the formula
The picture above is an example of finishing the whole white centre, starting with nothing on top. On the left cube, the top only has the white fixed centre, and one white edge centre sits in the middle of the right column on the front. Here is the sequence, one part at a time:
- Rw: the white edge centre goes up and sits to the right of the fixed centre.
- U2 then Rw: the piece that just went up moves to the left, and the second edge centre comes up after it. The middle strip is done, lying sideways.
- U: the middle strip turns to run up and down, and the right column of the top becomes the empty spot.
- Rw, U2: the first side strip comes up, then moves to the left.
- F2, Rw: the white strip in the left column of the front moves to the right column, then goes up to finish.
In this example, the next pieces were already waiting on the bottom (hidden in the picture), so each Rw pulls them up onto the front. On your own cube they won't be waiting like that: before each Rw, you have to find a white piece yourself and put it in the right column of the front.
Two side strips. Put three white pieces (corner centre, edge centre, corner centre) together into a strip standing in the right column of the front. Turn U so the middle strip on top runs up and down and the right column of the top is empty, then turn Rw.
- You start with (input)
- After the formula
This is how to build a strip right on the front. In the picture, two white pieces lie sideways in the top row of the front, and the third piece is on the right face, in the bottom row, in the far corner. F stands the two pieces up in the right column. Dw' slides the third piece to the bottom of that column. The strip now has all three pieces, and Rw takes it up.
- You start with (input)
- After the formula
This picture is the last move of step 1. The top already has the middle strip and the left strip, and the third white strip stands in the right column of the front. One Rw takes it up and the white centre is done. If the empty spot on top is in the left column, turn U2 first, otherwise Rw will push a finished strip off to the back.
Once the top has a strip on it, only use Rw to take up a strip that already has all three pieces, like in the two pictures just above. Don't use it to gather single pieces: each Rw pushes the whole right column of the top off to the back, so that column has to be empty and whatever comes up has to be a complete strip. Build single pieces into a strip on the front first, using F and the sideways turns Uw and Dw.
Step 2: The yellow centre, opposite white
Turn the cube over so the white centre is on the bottom. The yellow fixed centre is now on top. J Perm reminds you that you have to build this centre without breaking the first one (J Perm).
Here are the rules for keeping the white centre safe:
- Sideways turns are free. The six outer faces (U, D, F, B, R, L) and the two moves Uw and Dw never break the white or yellow centre.
- Every Rw must be undone with an Rw'. An Rw on its own pulls the right column of the white centre off the bottom.
Bring a strip up to the top
- You start with (input)
- After the formula
In the picture, the top already has the yellow middle strip and right strip. The last yellow strip stands in the right column of the front. Do:
Rw U2 Rw'
Rw lifts the strip up, U2 moves it to the left column, and Rw' puts the right column back where it was. This is exactly how J Perm describes it: bring the strip up, turn U2, then put the bottom centre back.
This sequence swaps the right column of the front with the left column of the top. The right column of the top stays the same. The two ends of the middle column on top swap with each other, so if the middle strip is already done and running up and down, it stays in one piece.
The yellow middle strip is also built with this sequence, one piece at a time: put a yellow edge centre in the middle of the right column on the front, put the empty spot in the middle of the left column on top, then do Rw U2 Rw'.
Build an upright strip with Dw
- You start with (input)
- After the formula
Before you take a strip up, you need all three yellow pieces in the right column of the front. In the picture, that column already has two yellow pieces at the top and is missing the bottom one. The third yellow piece is on the right face, in the bottom row, in the far corner.
Turn Dw': the bottom row of the side faces slides sideways, and the yellow piece lands right at the bottom of the column. The strip now has all three pieces, so carry on with Rw U2 Rw'.
For a piece in the top row, use Uw (this move turns the top face as well, so check where the empty spot is after turning). For a piece in the bottom row, use Dw. A piece in the middle row can't be slid sideways with these two moves, so turn the face it is on (F, R, B or L) to bring it up to the top row or down to the bottom row first.
Step 3: The four side centres
Hold the cube with the white centre on the left and the yellow centre on the right, just as J Perm shows. Keep holding it this way until the end of this guide.
Held like this, the moves Rw, Lw, 3R, U, F, D and B don't touch the white and yellow centres. Those are the only moves you need.
The third centre. Pick the front face. Its fixed centre tells you which colour to build (orange in the picture). Build the middle strip, then one side strip at a time.
- You start with (input)
- After the formula
In the picture, the front already has the left strip and the middle strip. The third orange strip stands in the right column of the top, and one Rw' brings it down. For the third centre you can turn Rw' on its own, because the other three faces don't have anything to break yet.
The fourth centre. J Perm suggests building the next centre on a face right next to the one you just finished, not on the opposite face (J Perm). The easiest way to hold it: turn the whole cube over by half a turn, still keeping white on the left and yellow on the right, so the centre you just finished goes to the back. You build the fourth centre on the top: build each strip on the front, then take it up with Rw U2 Rw' like in step 2.
- You start with (input)
- After the formula
In the picture, the orange centre you just finished is hidden on the back. The top (blue) already has the middle strip and the right strip, and the last strip stands in the right column of the front. From now on, every Rw needs an Rw' to go with it: an Rw on its own carries off a column of the centre on the back.
Once the fourth centre is done, the two unfinished centres are on the front and the bottom, so they are next to each other. Roll the whole cube back one step, so the front comes up to the top. The two unfinished centres are now on the top and the front, the fourth centre goes to the back, and the third centre goes down to the bottom.
Step 4: How to solve the last two centres on a 5x5
After the roll at the end of step 3, the two unfinished centres are on the top and the front. In the pictures below, the top is the red centre, the front is the green centre, and the other four centres are done. Your colours may be different, but you do exactly the same thing.
Ruwix makes a point worth remembering: with the last two centres, you only need to worry about solving one of them, and the other one solves itself (Ruwix). That's why every case below is about getting the red pieces onto the top.
The U and F moves only turn the centre of their own face. Use them to make your cube look like the picture before you do the algorithm.
Two middle strips swapped
- You start with (input)
- After the formula
Do the middle strip first. In the picture, the two red edge centres are at the two ends of the middle column on the front. The two green pieces are at the two ends of the middle row on top. Do:
3R U 3R'
3R lifts the middle column up, U turns it sideways, and 3R' puts the middle slice back. The plus signs on both faces are done at the same time. This sequence also turns the four corner centres on top by a quarter turn, so do it before you work on the side strips.
Two side strips swapped
- You start with (input)
- After the formula
The green strip is in the left column of the top, and the red strip is in the right column of the front. Do Rw U2 Rw' and the two strips swap places.
- You start with (input)
- After the formula
The mirror version: the green strip is in the right column of the top, and the red strip is in the left column of the front. Do Lw' U2 Lw. Using your left hand saves you from turning U2 and F2 to move the strips over to the other side.
A strip lying sideways
- You start with (input)
- After the formula
The green strip on top is in the row closest to you. Turn U once to move it to the left column, then do Rw U2 Rw'.
- You start with (input)
- After the formula
The red strip on the front is in the top row. Turn F to stand it up in the right column, then do Rw U2 Rw'.
Just one edge centre out of place
- You start with (input)
- After the formula
Can't see any strip to swap? Fix the pieces one at a time. In the picture, a red edge centre sits in the middle of the right column on the front, and a stray green piece sits in the middle of the right column on top. Do:
Rw U' 3R U Rw' U' 3R' U
This sequence only moves three edge centres. The piece in the middle of the right column on the front goes up to the middle of the right column on top. The piece it replaces goes down to the middle of the top row on the front. The piece that was there slides over to the middle of the right column. Every other centre piece stays where it is.
Memory tip: it is four pairs of moves, Rw U', 3R U, Rw' U', 3R' U. The two right layers and the middle slice take turns, going up first and then back down.
Just one corner centre out of place
- You start with (input)
- After the formula
In the picture, a red corner centre sits in the bottom-right corner of the front, and a stray green piece sits in the near-right corner of the top. Do:
Rw U Lw' U' Rw' U Lw U'
This sequence only moves three corner centres. The piece in the bottom-right corner of the front goes up to the near-right corner of the top. The piece it replaces goes down to the bottom-left corner of the front. The piece that was there slides over to the bottom-right corner.
The sure-fire way: one piece at a time
The two "one piece" algorithms above are enough to solve any situation with the last two centres:
- Turn U so an edge centre of the wrong colour on top sits in the middle of the right column.
- Turn F so a red edge centre on the front sits in the middle of the right column.
- Do Rw U' 3R U Rw' U' 3R' U. Repeat until the plus sign on top is all red.
- You start with (input)
- After the formula
- Do the same with the corner centres: the wrong piece in the near-right corner of the top, the red piece in the bottom-right corner of the front, then Rw U Lw' U' Rw' U Lw U'.
- You start with (input)
- After the formula
On the simulator, we scrambled the last two centres at random 60 times and solved them with exactly these four steps. It worked every time, with at most four goes of the edge centre algorithm and four goes of the corner centre algorithm.
This way is slower than swapping whole strips, but you don't have to think. Once you get the hang of it, swap strips first, then use the one-piece algorithms for whatever is left over.
Summary table and common mistakes when solving 5x5 centres
The picture for each algorithm is in the section named in the third column.
| Situation | Moves | Picture in section |
|---|---|---|
| Swap the right column of the front with the left column of the top | Rw U2 Rw' | Bring a strip up to the top |
| Left-hand mirror version | Lw' U2 Lw | Two side strips swapped |
| Two middle strips swapped | 3R U 3R' | Two middle strips swapped |
| One edge centre | Rw U' 3R U Rw' U' 3R' U | Just one edge centre out of place |
| One corner centre | Rw U Lw' U' Rw' U Lw U' | Just one corner centre out of place |
Four mistakes beginners often make:
- Forgetting to undo Rw. The centre on the bottom loses a column. Finish with Rw' and it goes back into place.
- Taking a strip up into the wrong column. The sequence Rw U2 Rw' replaces the left column of the top. If the left column is a finished strip, turn U2 first.
- Looking for the wrong kind of piece. An empty spot in a corner of the centre block only takes a corner centre, and an empty spot next to the fixed centre only takes an edge centre.
- Doing the side strips before the middle strip on the last two centres. The sequence 3R U 3R' turns the corner centres on top, so finish the plus sign first.
- You start with (input)
- After the formula
The picture above shows the second mistake and how to avoid it. The left column of the top is done, and the empty spot is in the right column. Turn U2 to move the empty spot to the left, and only then do Rw U2 Rw'. Skip that first U2 and the finished strip gets pushed down to the front.
What to do after solving all six centres?
The next step is to pair up the 12 edges, then solve it like a 3x3. See steps 2 and 3 of how to solve a 5x5 for beginners. If you can't solve a smaller cube yet, start with the 4x4.
Want to know how much of your solve the centres take? Time just this step on the timer.
With the EasyRubic app, you can follow the 3x3 step by step on a 3D cube before moving on to bigger cubes. Download EasyRubic.
Sources
Frequently asked questions
Which centre colour should I solve first on a 5x5?
Usually white, then yellow on the opposite face, then the four side centres. J Perm suggests starting with white to keep things less confusing, but any colour works.
Can 5x5 centres end up in the wrong colour order like on a 4x4?
No. Each face has one fixed centre piece, and its colour is the colour of that face. You just need to gather the other eight pieces around it.
How many algorithms do I need to memorise for 5x5 centres?
Three is enough: Rw U2 Rw' to swap strips, and the two one-piece algorithms for edge centres and corner centres on the last two centres. Lw' U2 Lw and 3R U 3R' make it faster, but you don't have to use them.
What if my last two centres don't match any picture in this guide?
Turn U and F, then compare again. If you still can't see a strip, use the "one piece at a time" way: fix the four edge centres first, then the four corner centres.
Does solving the centres mess up the edges and corners?
Yes, and that's fine. No edges or corners are solved at this step yet. You only need to keep the finished centres safe.
Cover photo: Mike Gonzalez (TheCoffee) / Wikimedia Commons, CC BY-SA 3.0


